Q: Isn’t there play in the throttle for a reason?

A: Yes and no. On a traditional cable-operated motorcycle, free play in the throttle is necessary because physically turning the handlebars adds tension to the cable. If there is too little free play in a cable system, this tension can be enough to cause the engine RPMs to fluctuate as the bars are turned. Motorcycles equipped with ride-by-wire throttles do not have this problem. Instead, many ride-by-wire systems suffer from sloppy throttles simply due to loose tolerances in factory plastic throttle housings. These excessive tolerances can make a throttle feel overly sensitive or “twitchy” and have the tendency to make riders feel disconnected from their machines. Using a StopSlop™ throttle spacer, a rider can reap the benefits of tighter clearances and regain that sense of connection to their motorcycle.

Q: Will this cause the throttle to stick?

A: No. It will not cause a sticky throttle because it is designed to act strictly as a shim to remove excess clearance. It does not pinch the throttle tube in the process.

Q: Can I just buy the STL file instead?

A: No. At surface level, the StopSlop™ may just look like a simple part that anyone with a 3D printer could make at home, but significant care is taken in their production. The StopSlop™ produced by MotoCulture LLC has been proven through testing both on and off the track. There are quality control standards to ensure that every StopSlop™ that is shipped out is safe for use. These standards include small batch production, individual tolerance inspection, and routine function testing. Distributing the company file to customers bypasses quality control standards that ensure safety and has the potential to put riders at risk.